Hier werden die Unterschiede zwischen zwei Versionen angezeigt.
Nächste Überarbeitung | Vorhergehende Überarbeitung | ||
node_3g_usb [05.12.2015 20:49] – angelegt havelock | node_3g_usb [03.10.2016 19:15] (aktuell) – havelock | ||
---|---|---|---|
Zeile 14: | Zeile 14: | ||
* TP-Link 4300, hat 2 USB-Ports, es sollte aber auch ein 1043ND funktionieren | * TP-Link 4300, hat 2 USB-Ports, es sollte aber auch ein 1043ND funktionieren | ||
- | * Fonic Surfstick: Huawei | + | * Fonic Surfstick: Huawei |
* Notebook mit Debian | * Notebook mit Debian | ||
* 230V Strom | * 230V Strom | ||
Zeile 37: | Zeile 37: | ||
===== Konfiguration ===== | ===== Konfiguration ===== | ||
- | |||
Als nächstes müssen einige zusätzliche Pakete von OpenWRT eingespielt werden. Das geht nicht ohne einen vorhandenen Uplink mittels Kabel, welches ich temporär angeschlossen habe. Da das DNS nicht funktionierte habe ich einen Nameserver in der / | Als nächstes müssen einige zusätzliche Pakete von OpenWRT eingespielt werden. Das geht nicht ohne einen vorhandenen Uplink mittels Kabel, welches ich temporär angeschlossen habe. Da das DNS nicht funktionierte habe ich einen Nameserver in der / | ||
Zeile 50: | Zeile 49: | ||
< | < | ||
opkg update | opkg update | ||
- | opkg install | + | opkg install kmod-usb-serial kmod-usb-serial-option\ |
kmod-usb-serial-wwan usb-modeswitch | kmod-usb-serial-wwan usb-modeswitch | ||
- | opkg install usbutils | + | opkg install chat ckmod-ppp ppp |
- | opkg install chat comgt kmod-ppp kmod-pppoe kmod-usb-serial kmod-usb-serial-option kmod-usb- | + | |
</ | </ | ||
- | Autoupdater deaktivieren | + | Optional für Tests auf der Konsole: |
+ | < | ||
+ | opkg install comgt usbutils | ||
+ | </ | ||
+ | Autoupdater deaktivieren | ||
+ | < | ||
uci set autoupdater.settings.enabled=' | uci set autoupdater.settings.enabled=' | ||
uci commit | uci commit | ||
+ | </ | ||
- | Überprüfung | + | Überprüfung, falls '' |
- | + | < | |
- | gcom info -d / | + | gcom info -d / |
- | gcom -d / | + | gcom -d / |
+ | </ | ||
+ | Anpassen der Netzwerkkonfiguration. Das alte WAN-Interface wird | ||
+ | auskommentiert und durch den folgenden Block ersetzt: | ||
<file conf / | <file conf / | ||
- | config interface | + | config interface |
- | option pincode **** | + | option pincode |
- | option device / | + | option device |
- | option apn pinternet.interkom.de | + | option apn 'pinternet.interkom.de' |
- | option username fonic | + | option username |
- | option password fonic | + | option password |
- | option service umts | + | option service |
- | option proto 3g | + | option proto '3g' |
- | option dialnumber *99# | + | option dialnumber |
+ | option type ' | ||
+ | option auto ' | ||
</ | </ | ||
- | Damit kommt das Interface hoch mit | ||
- | |||
- | ifup umts | ||
- | |||
- | Zusätzliche Tätigkeiten | ||
- | |||
- | * Nenne das UMTS-Interface wan | ||
- | * Kommentiere die alten WAN-Interfaces aus | ||
- | * Statisches DNS eintragen | ||
===== Notizen ===== | ===== Notizen ===== |