Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- fastd [06.07.2016 11:23] – havelock
+++ fastd [16.07.2017 19:32] (aktuell) – havelock
@@ Zeile 1: / Zeile 1: @@
 ====== fastd ======
-In Bearbeitung!
+TODO In Bearbeitung!
-Dokumentation: http://fastd.readthedocs.org/en/v17/.
+Dokumentation: http://fastd.readthedocs.org/en/v18/.
+Ab Debian Stretch (9) ist fastd und die dazugehörigen Abhängigkeiten vorhanden.
+Es sind also keine externen Repositories mehr notwendig.
 Bei der manuellen Übersetzung von fastd müssen das Init-Script und die manpages
@@ Zeile 9: / Zeile 12: @@
 Vorarbeiten
-  aptitude install build-essential pkg-config cmake doxygen
-Voraussetzung ist ''libuecc'', dieses muß vorab gebaut und installiert werden.
-Zertifikatswarnung für folgenden Download ignorieren: --no-check-certificate
 <code>
-cd /usr/src
+aptitude install build-essential pkg-config cmake doxygen bison libsodium-dev libjson-c-dev libcap-dev
-wget --no-check-certificate https://projects.universe-factory.net/attachments/download/83/libuecc-6.tar.xz
-tar xJf libuecc-6.tar.xz
-cd libuecc-6
-cmake .
-make
-make install
-ldconfig
 </code>
+Voraussetzung ist [[libuecc]], dieses muß vorab gebaut und installiert werden.
 Compilieren von fastd
-  aptitude install bison doxygen libsodium-dev libjson-c-dev libcap-dev
 <code>
+cd /usr/local/src
 git clone git://git.universe-factory.net/fastd
 cd fastd
-git checkout v17
+git checkout v18
 cd ..
 mkdir fastd-build
@@ Zeile 51: / Zeile 42: @@
 AUTOSTART="all"
 </file>
+Hinweis: Wenn fastd selbst kompiliert wurde, ist die Installation normalerweise
+nach ''/usr/local'' erfolgt. Das folgende Init-Script muß dann entsprechend
+angepaßt werden (''DAEMON=/usr/local/bin/$NAME'').
+Hinweis: Das Script ist auch Bestandteil der [[FFPI-Tools]].
 ++++ Init-Script für fastd |
-<file sh /etc/init.d/fastd>
+<file bash /etc/init.d/fastd>
 #!/bin/sh -e
@@ Zeile 65: / Zeile 62: @@
 # Default-Stop:      0 1 6
 # Short-Description: Fast and Secure Tunneling Daemon
-# Description: This script will start fastd tunnels as specified
+# Description:       This script will start fastd tunnels as specified
-#              in /etc/default/fastd and /etc/fastd/*/fastd.conf
+#                    in /etc/default/fastd and /etc/fastd/*/fastd.conf
 ### END INIT INFO
@@ Zeile 75: / Zeile 72: @@
 # Modified for restarting / starting / stopping single tunnels by Richard Mueller <mueller@teamix.net>
 # Modified for fastd by Nils Schneider <nils@nilsschneider.net>
+# Beautified by Thomas Hooge <pirat@hoogi.de>
 . /lib/lsb/init-functions
@@ Zeile 80: / Zeile 78: @@
 test $DEBIAN_SCRIPT_DEBUG && set -v -x
-DAEMON=/usr/bin/fastd
 DESC="Fast and Secure Tunneling Daemon"
+NAME=fastd
+DAEMON=/usr/bin/$NAME
 CONFIG_DIR=/etc/fastd
-test -x $DAEMON || exit 0
+SCRIPTNAME=/etc/init.d/$NAME
-test -d $CONFIG_DIR || exit 0
+# Exit if the package is not installed
+[ -x "$DAEMON" ] || exit 0
+# Exit if the configuration directory is not existent
+[ -d $CONFIG_DIR ] || exit 0
 # Source defaults file; edit that file to configure this script.
 AUTOSTART="all"
-if test -e /etc/default/fastd ; then
+if test -e /etc/default/$NAME ; then
-  . /etc/default/fastd
+	. /etc/default/$NAME
 fi
 if [ ! -d /var/run/fastd ]; then
-    mkdir /var/run/fastd/
+	mkdir /var/run/fastd/
-    chown fastd. /var/run/fastd
+	chown fastd. /var/run/fastd
 fi
 start_vpn () {
-    STATUS=0
+	STATUS=0
-    start-stop-daemon --start --quiet --oknodo \
+	start-stop-daemon --start --quiet --oknodo \
-        --pidfile /var/run/fastd/$NAME.pid \
+		--pidfile /var/run/fastd/$INSTANCE.pid \
-	--make-pidfile \
+		--make-pidfile \
-	--background \
+		--background \
-        --exec $DAEMON -- \
+		--exec $DAEMON -- \
-          --syslog-level info \
+		--syslog-level info \
-          --config $CONFIG_DIR/$NAME/fastd.conf \
+		--config $CONFIG_DIR/$INSTANCE/fastd.conf \
-        || STATUS=1
+		|| STATUS=1
 }
 stop_vpn () {
-  kill `cat $PIDFILE` || true
+	kill `cat $PIDFILE` || true
-  rm -f $PIDFILE
+	rm -f $PIDFILE
-  log_end_msg 0
+	log_end_msg 0
 }
 case "$1" in
-start)
+  start)
-  log_action_begin_msg "Starting $DESC"
+	log_action_begin_msg "Starting $DESC"
-  # autostart fastds
+	# autostart fastds
-  if test -z "$2" ; then
+	if test -z "$2" ; then
-    # check if automatic startup is disabled by AUTOSTART=none
+		# check if automatic startup is disabled by AUTOSTART=none
-    if test "x$AUTOSTART" = "xnone" -o -z "$AUTOSTART" ; then
+		if test "x$AUTOSTART" = "xnone" -o -z "$AUTOSTART" ; then
-      log_warning_msg "  Autostart disabled, no fastd will be started."
+			log_warning_msg "  Autostart disabled, no $NAME will be started."
-      exit 0
+			exit 0
-    fi
+		fi
-    if test -z "$AUTOSTART" -o "x$AUTOSTART" = "xall" ; then
+		if test -z "$AUTOSTART" -o "x$AUTOSTART" = "xall" ; then
-      # all fastds shall be started automatically
+			# all fastds shall be started automatically
-      for CONFIG in `cd $CONFIG_DIR; ls */fastd.conf 2> /dev/null`; do
+			for CONFIG in `cd $CONFIG_DIR; ls */fastd.conf 2> /dev/null`; do
-        NAME=${CONFIG%%/fastd.conf}
+				INSTANCE=${CONFIG%%/fastd.conf}
-        log_daemon_msg "  Autostarting fastd '$NAME'"
+				log_daemon_msg "  Autostarting $NAME '$INSTANCE'"
-        start_vpn
+				start_vpn
-      done
+			done
-    else
+		else
-      # start only specified fastds
+			# start only specified fastds
-      for NAME in $AUTOSTART ; do
+			for INSTANCE in $AUTOSTART ; do
-        if test -e $CONFIG_DIR/$NAME/fastd.conf ; then
+				if test -e $CONFIG_DIR/$INSTANCE/fastd.conf ; then
-          log_daemon_msg "  Autostarting fastd '$NAME'"
+					log_daemon_msg "  Autostarting $NAME '$INSTANCE'"
-          start_vpn
+					start_vpn
-        else
+				else
-          log_failure_msg "  Autostarting fastd '$NAME': missing $CONFIG_DIR/$NAME/fastd.conf file !"
+					log_failure_msg "  Autostarting $NAME '$INSTANCE': missing $CONFIG_DIR/$INSTANCE/fastd.conf file!"
-          STATUS=1
+					STATUS=1
-        fi
+				fi
-      done
+			done
-    fi
+		fi
-  #start fastds from command line
+	#start fastds from command line
-  else
+	else
-    while shift ; do
+		while shift ; do
-      [ -z "$1" ] && break
+			[ -z "$1" ] && break
-      NAME=$1
+			INSTANCE=$1
-      if test -e $CONFIG_DIR/$NAME/fastd.conf ; then
+			if test -e $CONFIG_DIR/$INSTANCE/fastd.conf ; then
-        log_daemon_msg "  Starting fastd '$NAME'"
+				log_daemon_msg "  Starting $NAME '$INSTANCE'"
-        start_vpn
+				start_vpn
-      else
+			else
-        log_failure_msg "  Starting fastd '$NAME': missing $CONFIG_DIR/$NAME/fastd.conf file !"
+				log_failure_msg "  Starting $NAME '$INSTANCE': missing $CONFIG_DIR/$INSTANCE/fastd.conf file!"
-       STATUS=1
+				STATUS=1
-      fi
+			fi
-    done
+		done
-  fi
+	fi
-  log_end_msg ${STATUS:-0}
+	log_end_msg ${STATUS:-0}
-  ;;
+	;;
-stop)
+  stop)
-  log_action_begin_msg "Stopping $DESC"
+	log_action_begin_msg "Stopping $DESC"
-  if test -z "$2" ; then
+	if test -z "$2" ; then
-    PIDFILE=
+		PIDFILE=
-    for PIDFILE in `ls /var/run/fastd/*.pid 2> /dev/null`; do
+		for PIDFILE in `ls /var/run/fastd/*.pid 2> /dev/null`; do
-      NAME=`echo $PIDFILE | cut -c16-`
+			INSTANCE=`echo $PIDFILE | cut -c16-`
-      NAME=${NAME%%.pid}
+			INSTANCE=${INSTANCE%%.pid}
-      log_daemon_msg "  Stopping fastd '$NAME'"
+			log_daemon_msg "  Stopping $NAME '$INSTANCE'"
-      stop_vpn
+			stop_vpn
-    done
+		done
-    if test -z "$PIDFILE" ; then
+		if test -z "$PIDFILE" ; then
-      log_warning_msg "  No fastd is running."
+			log_warning_msg "  No $NAME is running."
-    fi
+		fi
-  else
+	else
-    while shift ; do
+		while shift ; do
-      [ -z "$1" ] && break
+			[ -z "$1" ] && break
-      if test -e /var/run/fastd/$1.pid ; then
+			if test -e /var/run/fastd/$1.pid ; then
-        log_daemon_msg "  Stopping fastd '$1'"
+				log_daemon_msg "  Stopping $NAME '$1'"
-        PIDFILE=`ls /var/run/fastd/$1.pid 2> /dev/null`
+				PIDFILE=`ls /var/run/fastd/$1.pid 2> /dev/null`
-        NAME=`echo $PIDFILE | cut -c16-`
+				INSTANCE=`echo $PIDFILE | cut -c16-`
-        NAME=${NAME%%.pid}
+				INSTANCE=${INSTANCE%%.pid}
-        stop_vpn
+				stop_vpn
-      else
+			else
-        log_failure_msg "  Stopping fastd '$1': No such fastd is running."
+				log_failure_msg "  Stopping $NAME '$1': No such $NAME is running."
-      fi
+			fi
-    done
+		done
-  fi
+	fi
-  ;;
+	;;
-restart)
+  restart)
-  shift
+	shift
-  $0 stop ${@}
+	$0 stop ${@}
-  sleep 1
+	sleep 1
-  $0 start ${@}
+	$0 start ${@}
-  ;;
+	;;
-status)
+  status)
-  GLOBAL_STATUS=0
+	GLOBAL_STATUS=0
-  if test -z "$2" ; then
+	if test -z "$2" ; then
-    # We want status for all defined fastd.
+		# We want status for all defined fastd.
-    # Returns success if all autostarted fastds are defined and running
+		# Returns success if all autostarted fastds are defined and running
-    if test "x$AUTOSTART" = "xnone" ; then
+		if test "x$AUTOSTART" = "xnone" ; then
-      # Consider it a failure if AUTOSTART=none
+			# Consider it a failure if AUTOSTART=none
-      log_warning_msg "No fastds autostarted"
+			log_warning_msg "No fastds autostarted"
-      GLOBAL_STATUS=1
+			GLOBAL_STATUS=1
-    else
+		else
-      if ! test -z "$AUTOSTART" -o "x$AUTOSTART" = "xall" ; then
+			if ! test -z "$AUTOSTART" -o "x$AUTOSTART" = "xall" ; then
-        # Consider it a failure if one of the autostarted fastd is not defined
+				# Consider it a failure if one of the autostarted fastd is not defined
-        for VPN in $AUTOSTART ; do
+				for VPN in $AUTOSTART ; do
-          if ! test -f $CONFIG_DIR/$VPN/fastd.conf ; then
+					if ! test -f $CONFIG_DIR/$VPN/fastd.conf ; then
-            log_warning_msg "fastd '$VPN' is in AUTOSTART but is not defined"
+						log_warning_msg "fastd '$VPN' is in AUTOSTART but is not defined"
-            GLOBAL_STATUS=1
+						GLOBAL_STATUS=1
-          fi
+					fi
-        done
+				done
-      fi
+			fi
-    fi
+		fi
-    for CONFIG in `cd $CONFIG_DIR; ls */fastd.conf 2> /dev/null`; do
+		for CONFIG in `cd $CONFIG_DIR; ls */fastd.conf 2> /dev/null`; do
-      NAME=${CONFIG%%/fastd.conf}
+			INSTANCE=${CONFIG%%/fastd.conf}
-      # Is it an autostarted fastd?
+			# Is it an autostarted fastd?
-      if test -z "$AUTOSTART" -o "x$AUTOSTART" = "xall" ; then
+			if test -z "$AUTOSTART" -o "x$AUTOSTART" = "xall" ; then
-        AUTOVPN=1
+				AUTOVPN=1
-      else
+			else
-        if test "x$AUTOSTART" = "xnone" ; then
+				if test "x$AUTOSTART" = "xnone" ; then
-          AUTOVPN=0
+					AUTOVPN=0
-        else
+				else
-          AUTOVPN=0
+					AUTOVPN=0
-          for VPN in $AUTOSTART; do
+					for VPN in $AUTOSTART; do
-            if test "x$VPN" = "x$NAME" ; then
+						if test "x$VPN" = "x$NAME" ; then
-              AUTOVPN=1
+							AUTOVPN=1
-            fi
+						fi
-          done
+					done
-        fi
+				fi
-      fi
+			fi
-      if test "x$AUTOVPN" = "x1" ; then
+			if test "x$AUTOVPN" = "x1" ; then
-        # If it is autostarted, then it contributes to global status
+				# If it is autostarted, then it contributes to global status
-        status_of_proc -p /var/run/fastd/${NAME}.pid fastd "fastd '${NAME}'" || GLOBAL_STATUS=1
+				status_of_proc -p /var/run/fastd/${INSTANCE}.pid $NAME "$NAME '${INSTANCE}'" || GLOBAL_STATUS=1
-      else
+			else
-        status_of_proc -p /var/run/fastd/${NAME}.pid fastd "fastd '${NAME}' (non autostarted)" || true
+				status_of_proc -p /var/run/fastd/${INSTANCE}.pid $NAME "$NAME '${INSTANCE}' (non autostarted)" || true
-      fi
+			fi
-    done
+		done
-  else
+	else
-    # We just want status for specified fastd.
+		# We just want status for specified fastd.
-    # Returns success if all specified fastds are defined and running
+		# Returns success if all specified fastds are defined and running
-    while shift ; do
+		while shift ; do
-      [ -z "$1" ] && break
+			[ -z "$1" ] && break
-      NAME=$1
+			INSTANCE=$1
-      if test -e $CONFIG_DIR/$NAME.conf ; then
+			if test -e $CONFIG_DIR/$INSTANCE/fastd.conf ; then
-        # Config exists
+				# Config exists
-        status_of_proc -p /var/run/fastd/${NAME}.pid fastd "fastd '${NAME}'" || GLOBAL_STATUS=1
+				status_of_proc -p /var/run/fastd/${INSTANCE}.pid $NAME "$NAME '${INSTANCE}'" || GLOBAL_STATUS=1
-      else
+			else
-        # Config does not exist
+				# Config does not exist
-        log_warning_msg "fastd '$NAME': missing $CONFIG_DIR/$NAME.conf file !"
+				log_warning_msg "$NAME '$INSTANCE': missing $CONFIG_DIR/$INSTANCE/fastd.conf file!"
-        GLOBAL_STATUS=1
+				GLOBAL_STATUS=1
-      fi
+			fi
-    done
+		done
-  fi
+	fi
-  exit $GLOBAL_STATUS
+	exit $GLOBAL_STATUS
-  ;;
+	;;
-*)
+  *)
-  echo "Usage: $0 {start|stop|reload|restart|force-reload|cond-restart|soft-restart|status}" >&2
+	echo "Usage: $SCRIPTNAME {start|stop|restart|status}" >&2
-  exit 1
+	exit 1
-  ;;
+	;;
 esac
 exit 0
-# vim:set ai sts=2 sw=2 tw=0:
 </file>
 ++++

Wiki - Freifunk Pinneberg

Benutzer-Werkzeuge

Webseiten-Werkzeuge

Unterschiede

Seiten-Werkzeuge