Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- fastd [06.12.2015 05:37] – havelock
+++ fastd [21.11.2016 18:16] – havelock
@@ Zeile 1: / Zeile 1: @@
 ====== fastd ======
-In Bearbeitung!
+TODO In Bearbeitung!
-Dokumentation: http://fastd.readthedocs.org/en/v17/.
+Dokumentation: http://fastd.readthedocs.org/en/v18/.
 Bei der manuellen Übersetzung von fastd müssen das Init-Script und die manpages
@@ Zeile 9: / Zeile 9: @@
 Vorarbeiten
+<code>
+aptitude install build-essential pkg-config cmake doxygen bison libsodium-dev libjson-c-dev libcap-dev
+</code>
-  aptitude install build-essential pkg-config cmake doxygen
+Voraussetzung ist [[libuecc]], dieses muß vorab gebaut und installiert werden.
+Compilieren von fastd
+<code>
+cd /usr/local/src
+git clone git://git.universe-factory.net/fastd
+cd fastd
+git checkout v18
+cd ..
+mkdir fastd-build
+cd fastd-build
+cmake ../fastd
+make
+make install
+</code>
+<file conf /etc/default/fastd>
+# This is the configuration file for /etc/init.d/fastd
+#
+# Start only these VPNs automatically via init script.
+# Allowed values are "all", "none" or space separated list of
+# names of the VPNs. If empty, "all" is assumed.
+#
+AUTOSTART="all"
+</file>
+Hinweis: Wenn fastd selbst kompiliert wurde, ist die Installation normalerweise
+nach ''/usr/local'' erfolgt. Das folgende Init-Script muß dann entsprechend
+angepaßt werden (''DAEMON=/usr/local/bin/$NAME'').
+Hinweis: Das Script ist auch Bestandteil der [[FFPI-Tools]].
+++++ Init-Script für fastd |
+<file bash /etc/init.d/fastd>
+#!/bin/sh -e
+### BEGIN INIT INFO
+# Provides:          fastd
+# Required-Start:    $network $remote_fs $syslog
+# Required-Stop:     $network $remote_fs $syslog
+# Should-Start:      network-manager
+# Should-Stop:       network-manager
+# Default-Start:     2 3 4 5
+# Default-Stop:      0 1 6
+# Short-Description: Fast and Secure Tunneling Daemon
+# Description:       This script will start fastd tunnels as specified
+#                    in /etc/default/fastd and /etc/fastd/*/fastd.conf
+### END INIT INFO
+# Derived from the OpenVPN init script
+# Original version by Robert Leslie
+# <rob@mars.org>, edited by iwj and cs
+# Modified for openvpn by Alberto Gonzalez Iniesta <agi@inittab.org>
+# Modified for restarting / starting / stopping single tunnels by Richard Mueller <mueller@teamix.net>
+# Modified for fastd by Nils Schneider <nils@nilsschneider.net>
+# Beautified by Thomas Hooge <pirat@hoogi.de>
+. /lib/lsb/init-functions
+test $DEBIAN_SCRIPT_DEBUG && set -v -x
+DESC="Fast and Secure Tunneling Daemon"
+NAME=fastd
+DAEMON=/usr/bin/$NAME
+CONFIG_DIR=/etc/fastd
+SCRIPTNAME=/etc/init.d/$NAME
+# Exit if the package is not installed
+[ -x "$DAEMON" ] || exit 0
+# Exit if the configuration directory is not existent
+[ -d $CONFIG_DIR ] || exit 0
+# Source defaults file; edit that file to configure this script.
+AUTOSTART="all"
+if test -e /etc/default/$NAME ; then
+	. /etc/default/$NAME
+fi
+if [ ! -d /var/run/fastd ]; then
+	mkdir /var/run/fastd/
+	chown fastd. /var/run/fastd
+fi
+start_vpn () {
+	STATUS=0
+	start-stop-daemon --start --quiet --oknodo \
+		--pidfile /var/run/fastd/$INSTANCE.pid \
+		--make-pidfile \
+		--background \
+		--exec $DAEMON -- \
+		--syslog-level info \
+		--config $CONFIG_DIR/$INSTANCE/fastd.conf \
+		|| STATUS=1
+}
+stop_vpn () {
+	kill `cat $PIDFILE` || true
+	rm -f $PIDFILE
+	log_end_msg 0
+}
+case "$1" in
+  start)
+	log_action_begin_msg "Starting $DESC"
+	# autostart fastds
+	if test -z "$2" ; then
+		# check if automatic startup is disabled by AUTOSTART=none
+		if test "x$AUTOSTART" = "xnone" -o -z "$AUTOSTART" ; then
+			log_warning_msg "  Autostart disabled, no $NAME will be started."
+			exit 0
+		fi
+		if test -z "$AUTOSTART" -o "x$AUTOSTART" = "xall" ; then
+			# all fastds shall be started automatically
+			for CONFIG in `cd $CONFIG_DIR; ls */fastd.conf 2> /dev/null`; do
+				INSTANCE=${CONFIG%%/fastd.conf}
+				log_daemon_msg "  Autostarting $NAME '$INSTANCE'"
+				start_vpn
+			done
+		else
+			# start only specified fastds
+			for INSTANCE in $AUTOSTART ; do
+				if test -e $CONFIG_DIR/$INSTANCE/fastd.conf ; then
+					log_daemon_msg "  Autostarting $NAME '$INSTANCE'"
+					start_vpn
+				else
+					log_failure_msg "  Autostarting $NAME '$INSTANCE': missing $CONFIG_DIR/$INSTANCE/fastd.conf file!"
+					STATUS=1
+				fi
+			done
+		fi
+	#start fastds from command line
+	else
+		while shift ; do
+			[ -z "$1" ] && break
+			INSTANCE=$1
+			if test -e $CONFIG_DIR/$INSTANCE/fastd.conf ; then
+				log_daemon_msg "  Starting $NAME '$INSTANCE'"
+				start_vpn
+			else
+				log_failure_msg "  Starting $NAME '$INSTANCE': missing $CONFIG_DIR/$INSTANCE/fastd.conf file!"
+				STATUS=1
+			fi
+		done
+	fi
+	log_end_msg ${STATUS:-0}
+	;;
+  stop)
+	log_action_begin_msg "Stopping $DESC"
+	if test -z "$2" ; then
+		PIDFILE=
+		for PIDFILE in `ls /var/run/fastd/*.pid 2> /dev/null`; do
+			INSTANCE=`echo $PIDFILE | cut -c16-`
+			INSTANCE=${INSTANCE%%.pid}
+			log_daemon_msg "  Stopping $NAME '$INSTANCE'"
+			stop_vpn
+		done
+		if test -z "$PIDFILE" ; then
+			log_warning_msg "  No $NAME is running."
+		fi
+	else
+		while shift ; do
+			[ -z "$1" ] && break
+			if test -e /var/run/fastd/$1.pid ; then
+				log_daemon_msg "  Stopping $NAME '$1'"
+				PIDFILE=`ls /var/run/fastd/$1.pid 2> /dev/null`
+				INSTANCE=`echo $PIDFILE | cut -c16-`
+				INSTANCE=${INSTANCE%%.pid}
+				stop_vpn
+			else
+				log_failure_msg "  Stopping $NAME '$1': No such $NAME is running."
+			fi
+		done
+	fi
+	;;
+  restart)
+	shift
+	$0 stop ${@}
+	sleep 1
+	$0 start ${@}
+	;;
+  status)
+	GLOBAL_STATUS=0
+	if test -z "$2" ; then
+		# We want status for all defined fastd.
+		# Returns success if all autostarted fastds are defined and running
+		if test "x$AUTOSTART" = "xnone" ; then
+			# Consider it a failure if AUTOSTART=none
+			log_warning_msg "No fastds autostarted"
+			GLOBAL_STATUS=1
+		else
+			if ! test -z "$AUTOSTART" -o "x$AUTOSTART" = "xall" ; then
+				# Consider it a failure if one of the autostarted fastd is not defined
+				for VPN in $AUTOSTART ; do
+					if ! test -f $CONFIG_DIR/$VPN/fastd.conf ; then
+						log_warning_msg "fastd '$VPN' is in AUTOSTART but is not defined"
+						GLOBAL_STATUS=1
+					fi
+				done
+			fi
+		fi
+		for CONFIG in `cd $CONFIG_DIR; ls */fastd.conf 2> /dev/null`; do
+			INSTANCE=${CONFIG%%/fastd.conf}
+			# Is it an autostarted fastd?
+			if test -z "$AUTOSTART" -o "x$AUTOSTART" = "xall" ; then
+				AUTOVPN=1
+			else
+				if test "x$AUTOSTART" = "xnone" ; then
+					AUTOVPN=0
+				else
+					AUTOVPN=0
+					for VPN in $AUTOSTART; do
+						if test "x$VPN" = "x$NAME" ; then
+							AUTOVPN=1
+						fi
+					done
+				fi
+			fi
+			if test "x$AUTOVPN" = "x1" ; then
+				# If it is autostarted, then it contributes to global status
+				status_of_proc -p /var/run/fastd/${INSTANCE}.pid $NAME "$NAME '${INSTANCE}'" || GLOBAL_STATUS=1
+			else
+				status_of_proc -p /var/run/fastd/${INSTANCE}.pid $NAME "$NAME '${INSTANCE}' (non autostarted)" || true
+			fi
+		done
+	else
+		# We just want status for specified fastd.
+		# Returns success if all specified fastds are defined and running
+		while shift ; do
+			[ -z "$1" ] && break
+			INSTANCE=$1
+			if test -e $CONFIG_DIR/$INSTANCE/fastd.conf ; then
+				# Config exists
+				status_of_proc -p /var/run/fastd/${INSTANCE}.pid $NAME "$NAME '${INSTANCE}'" || GLOBAL_STATUS=1
+			else
+				# Config does not exist
+				log_warning_msg "$NAME '$INSTANCE': missing $CONFIG_DIR/$INSTANCE/fastd.conf file!"
+				GLOBAL_STATUS=1
+			fi
+		done
+	fi
+	exit $GLOBAL_STATUS
+	;;
+  *)
+	echo "Usage: $SCRIPTNAME {start|stop|restart|status}" >&2
+	exit 1
+	;;
+esac
+exit 0
+</file>
+++++

Wiki - Freifunk Pinneberg

Benutzer-Werkzeuge

Webseiten-Werkzeuge

Unterschiede

Seiten-Werkzeuge