====== fastd ======

TODO In Bearbeitung!

Dokumentation: http://fastd.readthedocs.org/en/v18/. 

Ab Debian Stretch (9) ist fastd und die dazugehörigen Abhängigkeiten vorhanden.
Es sind also keine externen Repositories mehr notwendig.

Bei der manuellen Übersetzung von fastd müssen das Init-Script und die manpages
ebenfalls manuell zur Verfügung gestellt werden.

Vorarbeiten 
<code>
aptitude install build-essential pkg-config cmake doxygen bison libsodium-dev libjson-c-dev libcap-dev
</code>

Voraussetzung ist [[libuecc]], dieses muß vorab gebaut und installiert werden.

Compilieren von fastd
<code>
cd /usr/local/src
git clone git://git.universe-factory.net/fastd
cd fastd
git checkout v18
cd ..
mkdir fastd-build
cd fastd-build
cmake ../fastd
make
make install
</code>

<file conf /etc/default/fastd>
# This is the configuration file for /etc/init.d/fastd

#
# Start only these VPNs automatically via init script.
# Allowed values are "all", "none" or space separated list of
# names of the VPNs. If empty, "all" is assumed.
#
AUTOSTART="all"
</file>

Hinweis: Wenn fastd selbst kompiliert wurde, ist die Installation normalerweise
nach ''/usr/local'' erfolgt. Das folgende Init-Script muß dann entsprechend 
angepaßt werden (''DAEMON=/usr/local/bin/$NAME'').

Hinweis: Das Script ist auch Bestandteil der [[FFPI-Tools]].

++++ Init-Script für fastd |
<file bash /etc/init.d/fastd>
#!/bin/sh -e

### BEGIN INIT INFO
# Provides:          fastd
# Required-Start:    $network $remote_fs $syslog
# Required-Stop:     $network $remote_fs $syslog
# Should-Start:      network-manager
# Should-Stop:       network-manager
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: Fast and Secure Tunneling Daemon
# Description:       This script will start fastd tunnels as specified
#                    in /etc/default/fastd and /etc/fastd/*/fastd.conf
### END INIT INFO

# Derived from the OpenVPN init script
# Original version by Robert Leslie
# <rob@mars.org>, edited by iwj and cs
# Modified for openvpn by Alberto Gonzalez Iniesta <agi@inittab.org>
# Modified for restarting / starting / stopping single tunnels by Richard Mueller <mueller@teamix.net>
# Modified for fastd by Nils Schneider <nils@nilsschneider.net>
# Beautified by Thomas Hooge <pirat@hoogi.de>

. /lib/lsb/init-functions

test $DEBIAN_SCRIPT_DEBUG && set -v -x

DESC="Fast and Secure Tunneling Daemon"
NAME=fastd
DAEMON=/usr/bin/$NAME
CONFIG_DIR=/etc/fastd
SCRIPTNAME=/etc/init.d/$NAME

# Exit if the package is not installed
[ -x "$DAEMON" ] || exit 0

# Exit if the configuration directory is not existent
[ -d $CONFIG_DIR ] || exit 0

# Source defaults file; edit that file to configure this script.
AUTOSTART="all"
if test -e /etc/default/$NAME ; then
	. /etc/default/$NAME
fi

if [ ! -d /var/run/fastd ]; then
	mkdir /var/run/fastd/
	chown fastd. /var/run/fastd
fi

start_vpn () {
	STATUS=0  
	start-stop-daemon --start --quiet --oknodo \
		--pidfile /var/run/fastd/$INSTANCE.pid \
		--make-pidfile \
		--background \
		--exec $DAEMON -- \
		--syslog-level info \
		--config $CONFIG_DIR/$INSTANCE/fastd.conf \
		|| STATUS=1
}

stop_vpn () {
	kill `cat $PIDFILE` || true
	rm -f $PIDFILE
	log_end_msg 0 
}

case "$1" in 
  start)  
	log_action_begin_msg "Starting $DESC"

	# autostart fastds
	if test -z "$2" ; then
		# check if automatic startup is disabled by AUTOSTART=none
		if test "x$AUTOSTART" = "xnone" -o -z "$AUTOSTART" ; then
			log_warning_msg "  Autostart disabled, no $NAME will be started."
			exit 0
		fi
		if test -z "$AUTOSTART" -o "x$AUTOSTART" = "xall" ; then
			# all fastds shall be started automatically
			for CONFIG in `cd $CONFIG_DIR; ls */fastd.conf 2> /dev/null`; do
				INSTANCE=${CONFIG%%/fastd.conf}
				log_daemon_msg "  Autostarting $NAME '$INSTANCE'"
				start_vpn
			done
		else
			# start only specified fastds
			for INSTANCE in $AUTOSTART ; do
				if test -e $CONFIG_DIR/$INSTANCE/fastd.conf ; then 
					log_daemon_msg "  Autostarting $NAME '$INSTANCE'"
					start_vpn
				else
					log_failure_msg "  Autostarting $NAME '$INSTANCE': missing $CONFIG_DIR/$INSTANCE/fastd.conf file!"
					STATUS=1
				fi
			done
		fi
	#start fastds from command line
	else
		while shift ; do
			[ -z "$1" ] && break
			INSTANCE=$1
			if test -e $CONFIG_DIR/$INSTANCE/fastd.conf ; then
				log_daemon_msg "  Starting $NAME '$INSTANCE'"   
				start_vpn
			else
				log_failure_msg "  Starting $NAME '$INSTANCE': missing $CONFIG_DIR/$INSTANCE/fastd.conf file!"
				STATUS=1
			fi
		done
	fi
	log_end_msg ${STATUS:-0}
	;;
  stop)
	log_action_begin_msg "Stopping $DESC"
	if test -z "$2" ; then
		PIDFILE=
		for PIDFILE in `ls /var/run/fastd/*.pid 2> /dev/null`; do
			INSTANCE=`echo $PIDFILE | cut -c16-`
			INSTANCE=${INSTANCE%%.pid}
			log_daemon_msg "  Stopping $NAME '$INSTANCE'"
			stop_vpn
		done
		if test -z "$PIDFILE" ; then
			log_warning_msg "  No $NAME is running."
		fi
	else
		while shift ; do
			[ -z "$1" ] && break
			if test -e /var/run/fastd/$1.pid ; then
				log_daemon_msg "  Stopping $NAME '$1'"
				PIDFILE=`ls /var/run/fastd/$1.pid 2> /dev/null`
				INSTANCE=`echo $PIDFILE | cut -c16-`
				INSTANCE=${INSTANCE%%.pid}
				stop_vpn
			else
				log_failure_msg "  Stopping $NAME '$1': No such $NAME is running."
			fi
		done
	fi
	;;
  restart)
	shift 
	$0 stop ${@}
	sleep 1
	$0 start ${@}
	;;
  status)
	GLOBAL_STATUS=0
	if test -z "$2" ; then
		# We want status for all defined fastd.
		# Returns success if all autostarted fastds are defined and running
		if test "x$AUTOSTART" = "xnone" ; then
			# Consider it a failure if AUTOSTART=none
			log_warning_msg "No fastds autostarted"
			GLOBAL_STATUS=1
		else
			if ! test -z "$AUTOSTART" -o "x$AUTOSTART" = "xall" ; then
				# Consider it a failure if one of the autostarted fastd is not defined
				for VPN in $AUTOSTART ; do
					if ! test -f $CONFIG_DIR/$VPN/fastd.conf ; then
						log_warning_msg "fastd '$VPN' is in AUTOSTART but is not defined"
						GLOBAL_STATUS=1
					fi
				done
			fi
		fi
		for CONFIG in `cd $CONFIG_DIR; ls */fastd.conf 2> /dev/null`; do
			INSTANCE=${CONFIG%%/fastd.conf}
			# Is it an autostarted fastd?
			if test -z "$AUTOSTART" -o "x$AUTOSTART" = "xall" ; then
				AUTOVPN=1
			else
				if test "x$AUTOSTART" = "xnone" ; then
					AUTOVPN=0
				else
					AUTOVPN=0
					for VPN in $AUTOSTART; do
						if test "x$VPN" = "x$NAME" ; then
							AUTOVPN=1
						fi
					done
				fi
			fi  
			if test "x$AUTOVPN" = "x1" ; then
				# If it is autostarted, then it contributes to global status
				status_of_proc -p /var/run/fastd/${INSTANCE}.pid $NAME "$NAME '${INSTANCE}'" || GLOBAL_STATUS=1
			else
				status_of_proc -p /var/run/fastd/${INSTANCE}.pid $NAME "$NAME '${INSTANCE}' (non autostarted)" || true
			fi
		done
	else
		# We just want status for specified fastd.
		# Returns success if all specified fastds are defined and running
		while shift ; do
			[ -z "$1" ] && break
			INSTANCE=$1
			if test -e $CONFIG_DIR/$INSTANCE/fastd.conf ; then
				# Config exists
				status_of_proc -p /var/run/fastd/${INSTANCE}.pid $NAME "$NAME '${INSTANCE}'" || GLOBAL_STATUS=1
			else
				# Config does not exist
				log_warning_msg "$NAME '$INSTANCE': missing $CONFIG_DIR/$INSTANCE/fastd.conf file!"
				GLOBAL_STATUS=1
			fi
		done
	fi
	exit $GLOBAL_STATUS
	;;
  *)
	echo "Usage: $SCRIPTNAME {start|stop|restart|status}" >&2
	exit 1
	;;
esac

exit 0

</file>
++++