auto lo enp0s1
iface lo inet loopback
iface enp0s1 inet static
	address 91.143.81.176
	netmask 255.255.255.0
	broadcast 91.143.81.255
	gateway 91.143.81.1
iface enp0s1 inet6 static
	address 2a02:0180:1:1::5b8f:51b0
	netmask 64
	gateway 2a02:0180:1:1::1

# Freifunk Pinneberg Bridge-Interface (IPv4 und IPv6)
# - bridge_ports none sorgt dafür, daß die Brücke auch ohne Interface erstellt wird
auto br-ffpi
iface br-ffpi inet6 static
	bridge-ports none
	address fde8:21c6:9d82::0c01
	netmask 64
iface br-ffpi inet static
	address 10.137.12.1
	netmask 255.255.0.0
     
# BATMAN Interface
allow-hotplug bat0
iface bat0 inet6 manual
	pre-up modprobe batman-adv
	pre-up batctl if add mesh-vpn
	up ip link set $IFACE up
	post-up brctl addif br-ffpi $IFACE
	post-up batctl it 10000
	post-up batctl gw_mode server 1000mbit/1000mbit
	post-up /sbin/ip rule add from all fwmark 0x1 table 42
	post-up start-stop-daemon -b --start --exec /usr/local/sbin/batadv-vis -- -i $IFACE -s
	post-up start-stop-daemon -b --start --exec /usr/local/sbin/alfred -- -i br-ffpi -b $IFACE
	pre-down /sbin/ip rule del from all fwmark 0x1 table 42
	pre-down brctl delif br-ffpi $IFACE || true
	down ip link set $IFACE down